Host Bus Interface Specifications

Speed

133-MHz, 32-bit PCI-X 1.0

Voltage

3.3 V and 5 V bus supported

Compliance

Conforms to PCI-X Addendum rev. 1.0a, PCI Local Bus Specification rev. 2.2, PCI Hot Plug Specification 1.0, PCI Bus Power Management Interface Specification rev 1.1

Fibre Channel Specifications

Speed

200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex (2-Gbps speed only)

Compliance

Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), Fibre Channel Framing and Signaling (FC-FS)

Topology

FC-AL, FC-AL-2, switched fabric (F-Port)

Class of service

Class 3 Fibre Channel service

Protocol

SCSI (FCP), tape (FCP-2)

Logins and exchanges

Up to 16 total logins in private loop (FC-AL/FC-AL-2) topology, 8 (target) logins in fabric (F-Port connect) topology, and up to 64 FCP/FCP-2 exchanges

FC frame size

2K fixed

Buffer credits

2 credits issued

Physical Specifications

Ports

One

LEDs

Two

Media

Multimode optic

Optics

Short wave laser

Form factor

Low-profile MD1: 11.99 cm×6.44 cm (4.721"×2.536")

Bracket size

Standard size, with optional low profile size

Connectors

LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module

Power consumption

~ 5.0 watts

RoHS compliant

Yes

Environment and Equipment Specifications

Airflow

0 lf/m

Temperature

Operating: 0°C/32°F to 55°C/131°F. Storage: -20°C/-4°F to 70°C/158°F

Humidity

Relative (noncondensing): 10% to 90%, Storage: 5% to 95%

Distance

2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber.

Cable

50/125μm multimode fiber, 62.5/125 μm multimode fiber.

Multi-switch fabric

Supports up to two switches

Software

SANsurfer HBA Manager

Easy to use, autoconfiguration, wizard-based HBA management application with preconfigured settings.

Operating system drivers

Windows Server 2003, Windows 2000, Linux (Red Hat 8, 9, Advanced Server 2.1 and 3.0; SuSE® SLES 8), Solaris x86. Only 32-bit variants are supported. A single common driver supports the QLA200 and all 2-Gbps QLogic FC HBAs.

Flash utilities

Configuration utilities resident with boot code

Boot support

Intel x86: BIOS (32-bit)

Localization

Available in English, French, German, Chinese, Japanese, Portuguese, Italian, Spanish, and Korean.