• Kiểm Tra Bảo Hành

    sản phẩm bán chạy

      IBM ServeRAID M5210 SAS/SATA Controller adapter

      [ Part number: 46C9110 ]

      IBM ServeRAID M5210 SAS/SATA Controller for IBM System x

      Giá: Liên hệ

    Chọn mua

    Mua hàng

    ServeRAID M510 and M5210e specifications

    The ServeRAID M5210 and M5210e SAS/SATA controllers have the following specifications:

    • LSI SAS3108 12 Gbps RAID on Chip (ROC) controller.
    • PCI low profile, half-length - MD2 form factor (M5210) or onboard chip (M5210e).
    • Eight internal 12 Gbps SAS/SATA ports (support for 12, 6, or 3 Gbps SAS speeds and 6 or 3 Gbps SATA speeds). Up to 12 Gbps throughput per port.
    • Two internal x4 HD Mini-SAS connectors (SFF-8643).
    • PCI Express 3.0 x8 host interface.
    • Support for RAID 0, 1, and 10 standard; support for RAID 5, 50, 6, and 60 with optional upgrades.
    • Optional onboard data cache (DDR3 running at 1866 MHz) with the choice of the following backup:
      • 1 GB (no battery backup)
      • 1 GB or 2 GB with flash backup
    • Support for SAS and SATA HDDs and SSDs.
    • Support for intermixing SAS and SATA HDDs and SSDs. Mixing different types of drives in the same array is not supported.
    • Connections to up to 32 internal drives, depending on the server model.
    • Optional support for self-encrypting drives (SEDs) with MegaRAID SafeStore.
    • Optional support for SSD performance acceleration with MegaRAID FastPath and SSD caching with MegaRAID CacheCade.
    • Support for up to 64 virtual disks, up to 128 arrays, up to 16 virtual disks per array, and up to 32 physical drives per array.
    • Support for logical drive sizes greater than 2 TB.
    • Support for Integrated MegaRAID (iMR) mode (no cache memory upgrades installed) or MegaRAID (MR) mode (requires 1 GB or 2 GB cache memory upgrade).
      • iMR mode supports (no cache memory upgrades installed) the following features:
        • RAID 0, 1, and 10, and, optionally, 5 and 50
        • Fixed stripe unit size of 64 KB
        • Self-encrypting drives with optional Zero Cache/RAID 5 upgrade
        • Both RAID and JBOD (pass-thru mode with system drives) configurations
          • Up to 16 drives are supported in a RAID configuration.
          • Up to 63 drives are supported in a JBOD configuration. (JBOD drives can be used as bootable drives.)
      • MR mode supports (1 GB or 2 GB cache memory upgrade required):
        • RAID 0, 1, 10, 5, and 50 and, optionally, 6 and 60 (Non-RAID is not supported.)
        • Configurable stripe unit size from 64 KB up to 1 MB
        • Self-encrypting drives
        • Optional SSD performance features (FastPath and CacheCade)
    • Compliant with Disk Data Format (DDF) configuration on disk (CoD).
    • S.M.A.R.T. support.
    • MegaRAID Storage Manager management software.

    Sản phẩm đang được cập nhật...

    TOP