HPE ProLiant DL360 Gen11 Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle Kit - P48906-B21, P53221-001

Notes:
− Maximum quantity for LC Heat Sink is one per system.
− If Processor Wattage is more than 185W and less than or equal to 270W, then "Performance Heatsink"
and "Performance Fan" must be selected.
− If Processor Wattage is more than 270W, then LC Heat Sink Kit must be selected. This applies to all
processor SKUs for DL360 Gen11 including High Bandwidth Memory (HBM) processors.
− If Liquid Cooling HeatSink Fan FIO Bundle Kit is selected, then a 2P configuration must be selected.
− If Liquid Cooling HeatSink Fan FIO Bundle Kit is selected, then any Fans (Standard Fan Kit or High
Performance Fan Kit) cannot be selected.
− If Liquid Cooling HeatSink Fan FIO Bundle Kit is selected, then “Standard heat Sink” or "High Perf Heat
Sink" cannot be selected.
− The HPE DL360 Gen11 Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle kit is designed as Factory
Installation only & is not designated as a Customer Self-Repair (CSR) part to prevent damage to CPUs
when customer is conducting the field upgrade on the Liquid Cooling modular itself or CPUs.
− The HPE DL360 Gen11 Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle kit contains (2) cold plates
(1 per CPU) each with a pump, Tubes, (7) 4028 fans and a radiator. The LC Heat Sink option is designed
to cool down the processor effectively using cooled inlet air.
− The water-cooling liquid is not corrosive for human body, but to avoid the risk of connection or damages
in a longer term, it is recommended to wash hands after contact. There is no leak detection capability, yet
the pumps inside of the system are redundant. If a pump or any of the components inside the solution
fail, the CPU temperature or internal server temperature may increase leading to a iLO alert message.
− The HPE DL360 Gen11 Closed-loop Liquid Cooling Heat Sink Fan FIO Bundle kit is offerred with
Standard (3/3/3) Warranty support along with the server. Customers are able to purchase extended
support for years (4) and (5).
− This Cooling Solution is subject to a maximum usage (operational) limitation not to exceed (5) years and
required to be replaced when this time limit has been reached. HPE recommends replacing the Closedloop
Liquid Cooling solution when it has reached the maximum (5) years of use. Parts and components
that Hewlett Packard Enterprise determines have surpassed the standard (3) years warranty* will not be
provided, repaired, or replaced under warranty coverage. Contact your local HPE sales representative for
additional information.