NOTE: This GPU enablement kit includes 2 Heatsinks and 8 cables to enable double wide GPUs to be supported.
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card for cards over 150W. Cards 150W or under can used 800W Power Supplies; however check the power usage via the HPE Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: There are limitations on the chassis and processor supported when adding Graphics accelerators.
NOTE: Passive cards will require the addition of the High Performance Fan Kit (719079-B21).
NOTE: We support up to 2 Double wide and 3 single wide Graphics cards, limitations apply.
NOTE: This kit support up to 2 double wide Graphics cards.
NOTE: Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots left open.
NOTE: There are limitations on GPU support (1x double wide) with the NVMe bay installed.
NOTE: All GPU support is limited with 1TB max memory support with the exception on NVIDIA P series, AMD and Intel cards.
NOTE: This kit includes PCIe GPU Retention Brackets that need to be installed on the air baffle to support FL cards.
NOTE: Not required for M2000.